Key Features

1. 1400W High-efficiency
    ( Gold) Power Supplies
2. 3x 3.5" Hot-Swap SAS / SATA
    Drive Bays
3. 1x Slim DVD-ROM Drive (optional)
4. 6x 4cm Counter-rotating PWM Fans
5. 1x Low Profile I/O Expansion Slot
6. Power Switch, Reset Switch and
    5 LED Indicators
7. Full SES2 support is available with SAS motherboards and other compatible components.

Standard Parts List

     Part Number    Qty    Description
Chassis    CSE-818TQ-1400LPB    1    1U Chassis 818TQ
Backplane    BPN-SAS-818TQ    1    3-port 818 TQ (W/ AMI 9071) backplane, support up to 3x 3.5-inch SAS/SATA HDD
Cable 1    CBL-0044L    3    SATA CABLE 57.5CM FLAT S-S PBF. 26AWG flat
Part(s)    MCP-260-00024-0N    1    1U I/O shield for X8 server MB (3rd LAN + 4xLAN)
Power Supply    PWS-1K41F-1R    1    1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
Power Distributor    PDB-PT818-3824    1    PDB for new SC818 with 3x8pin to support X9 Quad.
Cable 2    CBL-0087    1    Front Control Cable Round 16 pin to 16 pin Ribbon 20
Cable 3    CBL-0154L    1    AC POWER CABLE FOR SC818, 36.5CM PBF
Cable 4    CBL-0174L    1    PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,14AWG,15A,125V,RoHS/REACH
Peripheral Drive 1    CSE-PT93L-B    1    Black DVD dummy cover for SC813, 813M, 815, PBF-RoHS
Fan 1    FAN-0101L4    6    40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808
Front Panel    FPB-FP813-D    1    Front control board dual color for SC815,SC813M (C)
Drive Tray(s)    MCP-220-00093-0B    3    Black gen 3.5 hot-swap 3.5\\" HDD tray (w/o logo)
Rear Window    MCP-240-81807-0N    1    Riser card bracket for SC818
Rear Window    MCP-240-81808-0N    1    LP rear window for SC818 rev K (slot 4)
Mounting Rails    MCP-290-00016-0N    1    1U open rack bracket set for CSE-PT51L,MCP-290-00054-0N
Mounting Rails    MCP-290-00042-0V    1    Rail set for SC808,809,818
Fan Holder    MCP-320-00027-0B    28    Plastic pin for 40x28, 40x56 fan
Fan Holder    MCP-320-00028-0B    1    Fan holder for 6pcs 40x56 fan, assemble-able for SC819/SC119/SC818/SC116
Fan Holder    MCP-320-00029-0B    1    Fan holder for 0pcs 40x56 fan, assemble-able for SC819/SC119/SC818/SC116
Fan Holder    MCP-320-00030-0B    1    Fan holder for 1pcs 40x56 fan, assemble-able

Optional Parts List

     Part Number    Qty    Description
Air Shroud    MCP-310-81807-0B
MCP-310-81801-0B    -
-    Mylar air shroud for SC818TQ (H8QG6+)
Mylar air shroud for SC818 (H8QM 32DIMM)
Mounting Rails    MCP-290-00056-0N
MCP-290-00052-0N-BULK

-
-

19" to 26.4" outer rail, /quick, for 1U 17.2" W chassis
25.6" to 33.05" outer rail, /quick, for 1U 17.2" W chassis (10 sets/pack)
Peripheral Drives    FPD-TEAC-S(B)
CSE-PT91L
CSE-PT40L-B0    -
-
-    TEAC 3.5" 1.44MB Slim Floppy Drive (B = black)
Slim FDD kit
Black USB/COM port tray
Peripheral Drives    DVM-TEAC-824B
DVM-PNSC-824B
DVM-TEAC-DVD-SBT3
DVM-PNSC-DVD-SBT3
CSE-PT92L
MCP-220-81502-0N    -
-
-
-
-
-    Black slim IDE DVD (8x DVD, 24x CDR), TEAC
Black slim IDE DVD (8x DVD, 24x CDR), Panasonic
Black slim SATA DVD (8x DVD, 24x CDR), TEAC
Black slim SATA DVD (8x DVD, 24x CDR), Panasonic
Slim IDE DVD kit (include backplane, cable)
Slim SATA DVD kit (include backplane, cable)
Front Bezel
( Compatibility Table )    CSE-PTFB-813(B)

 

 

CSE-PTFB-813-02(B)

 

 

-

 

 

-

 

 

 

Front Bezel Cover with Horizontal Slits, Black (B) & Beige

Front Bezel Cover with Round Venting Holes, Black (B) & Beige
LCD/OLED Solutions    -    -    Please reference the LCD/OLED Display Solutions for details
Adaptor HDD carrier    MCP-220-00043-0N    -    Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray