Key Applications
- Virtualization
- Enterprise Server
- Data Center Optimized
- Application and data serving
- Model analysis
- Compute Intensive Applications
 
Key Features
Dual sockets P+ (LGA-4189) 3rd Gen Intel® Xeon® Scalable processors
CPU TDP supports Up to 270W TDP
3 UPI up to 11.2 GT/s
Intel® C621A Chipset
SATA: Intel® C621A controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
Up to 4TB 3DS ECC RDIMM, DDR4-3200MHz, Up to 4TB 3DS ECC LRDIMM, DDR4-3200MHz
- Up to 4TB Intel® Optane™ Persistent Memory 200 Series, DDR4-3200MHz, in 18 DIMM slots (P1-DIMMB2 and P2-DIMMB2 are reserved for Intel® Optane Persistent Memory 200 Series only)
4 PCI-E 4.0 x16 Low Profile (LP)
2 PCI-E 4.0 x8 Low Profile (LP)
Dual Gigabit LAN with Intel® i350 Ethernet Controller
8 hotswap 3.5" SATA3 (6 Gbps) drive bays with Intel® C621A controller for RAID 0,1,5,10
1 M.2 support:
- M.2 Interface: PCI-E 3.0 x4
- M.2 Form Factor: 2260, 2280, 22110
- M.2 Key: M-Key
Optional 1 slim DVD-ROM drive
Optional 2 fixed 2.5" NVMe/SSD/HDD/SuperDOM
3 heavy duty Hot-swappable 13.5K RPM Middle Cooling Fans with optimal fan speed control
1 air shroud
1200W Redundant Power Supplies Titanium level 100-240Vac and 200-240 Vdc
1 rear VGA, 1 Type A port, 2 COM Ports (1 front; 1 rear) and 6 USB ports (2 front USB 2.0 and 4 rear USB 3.0)

Parts List - (Items Included)

 

Part Number

Qty

Description

Motherboard / Chassis MBD-X12DPi-N6

CSE-825BTS-R1K23LPP1 1

1 Super X12DPi-N6 Motherboard

2U Chassis

Backplane BPN-SAS3-825TQ 1 8-port 2U SAS3 12Gbps TQ backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD

Cable 1 CBL-0343L-01 2 30AWG IPASS/4SATA 76/66/54/45CM W/SB

Drive Tray(s) MCP-220-00007-01 1 Black USB/COM port tray for SC825, 836

Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.

Manual MNL-2241-QRG 1 SYS-620P-TR(T) Quick Reference Guide

Software SFT-OOB-LIC 1 License key for enabling OOB BIOS management

Heatsink / Retention SNK-P0078P 1 2U Passive CPU Heat Sink for X12 Generation Intel Whitley and Cedar Island Platforms

Heatsink / Retention SNK-P0078PC 1 2U Passive CPU Heat Sink w/ a Side Air Channel for X12 Generation Intel Whitley and Cedar Island Platforms

*Power Supply PWS-1K23A-1R 2 AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 336x76x40 mm,HF,RoHS/REACH

*Power Distributor PDB-PT825-S8824 1 SC825 24PIN REDUNDANT PWR DISTRIBUTOR W/ SHORT CBL

*Cable 2 CBL-0071L 1 ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF

*Cable 3 CBL-PWCD-0160-IS 2 PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH

*Cable 4 CBL-PWEX-1078 3 PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,20CM,22AWG,5A/PIN,RoHS

*FAN 1 FAN-0206L4 3 80x80x38 mm, 13.5K RPM, Middle Cooling Fan for 2U and above Servers

*Front Panel FPB-FP836-D 1 Front control board Dual color LED(FP836-D)forSC823M,825,825M,828,829,835,836

*Drive Tray(s) MCP-220-00023-01 1 Black USB dummy tray support 1x 2.5" slim HDD for SC825, 836

*Drive Tray(s) MCP-220-00075-0B 8 Black gen 5.5 hot-swap 3.5" HDD tray

*Drive Tray(s) MCP-220-82502-0B 2 Black fixed 3.5\\" HDD tray or FDD dummy tray

*Rear Window MCP-240-82608-0N 1 216B/826B LP rear window,RoHS/REACH,PBF

*Peripheral Drive1 MCP-290-00007-01 1 Black DVD dummy cover for SC825, 836

*Rail Set MCP-290-00053-0N 1 Rail set, quick/quick, default for 2,3U 17.2";W

*Rail Set MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack

*Drive Tray(s) MCP-290-82607-0N 1 826B/216B rear dummy cover for 2 X 2.5

*Air Shroud MCP-310-29001-0N 1 SC825/826/216/213 Intel DP X9,X8 air shroud 13.68x13/12x13

Notes:

Parts with * are inside the chassis

Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.

Optional Parts List

  Part Number Qty Description

Optional Gen3 8-ports SAS Raid controller kit for SYS-620P-TR 1x AOC-S3108L-H8IR or AOC-S3108L-H8IR-16DD + 2x CBL-SAST-0699 ( or 2x CBL-SAST-0556) 1 Convert 8x hotswap SATA drives to SAS drives

Optional Gen4 8-ports SAS Raid controller kit for SYS-620P-TR 1x AOC-S3908L-H8IR-P or AOC-S3908L-H8IR-16DD-P or AOC-S3908L-H8IR-32DD-P + 1x CBL-SAST-1270S-100 1 Convert 8x hotswap SATA drives to SAS drives

Optional parts needed to support 2x fixed NVMe drives 1x CBL-SAST-0953 (Slimline x8 to PCIe 2x SFF-8639 Power) and 2x MCP-110-82501-0N 1 1x MCP-110-82501-0N can support 1x 2.5 inch NVMe fixed drives and 1x CBL-SAST-0953 can support 2x 2.5 inch NMVe drives

Optional parts needed to support 2x fixed SATA drives 2x CBL-0044L(SATA CABLE 61CM FLAT S-S PBF.26AWG flat) and 1x CBL-0082L (Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG) 1 1x CBL-0044L can support can support 1x 2.5 inch SATA drives and 1x CBL-0082L can support can support 2x 2.5 inch SATA drives

use 1x BTR-TFM8G-LSICVM02 and 1x BKT-BBU-BRACKET-05  with AOC-S3108L-H8IR-16DD or AOC-S3108L-H8IR use 1x BTR-TFM8G-LSICVM02 and 1x BKT-BBU-BRACKET-05  with AOC-S3108L-H8IR-16DD or AOC-S3108L-H8IR 1 SuperCap and mounting bracket used for SAS raid controllers