ATIC Computers - Servers / Supermicro S1356 - SSG-2027B-DE2R24L - SSG-2027B-DE2R24L 2U Storages TWO nodes Servers S1356 24x 2.5" 2x920W

Two hot-pluggable systems (nodes) in a 2U form - each node has [ Dual socket B2 (LGA 1356) for Dual intel Xeon X5 24xx V1/v2 CPu - 6x DDR3-ECC/REg Slots (192Gb per node) - I/O ports: 2 GbE LAN (1 for IPMI 2.0) - 3x PCI-E 3.0 slots per node ] - 24x Hot-swap 2.5" SAS2 HDD bays, 24x Hot-swap 2.5" SAS2 HDD bays - 2x 920W redundant powers - 2U Rackmount

Product SKUs

SSG-2027B-DE2R24L	SuperStorage 2027B-DE2R24L (Black)


Motherboard

2x Super X9DBS-F-2U


Processor/Cache

CPU	Dual Socket B2 (LGA 1356) Intel® Xeon® processor E5-2400 v2 Up to 95W TDP
Cache	Up to 25MB
System Bus	QPI up to 8 GT/s


System Memory (per Node)

Memory Capacity	6x 240-pin DIMM sockets Supports up to 192GB DDR3 ECC Registered memory Memory Mirroring supported
Memory Type	1866/1600/1333/1066/800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB , 32GB
Memory Voltage	1.5 V / 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® C602J chipset
SAS/SATA*	LSI 2308 SAS2 (6Gbps)
SAS2 Expander	Scalability through cascading 6Gb SAS2/SATA2 HDD support Inband SES-2 Enclosure Management
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Dual-Port Gigabit Ethernet Controller Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization
Graphics	Matrox G200eW 16 MB DDR2
Super I/O	Winbond 83527HF chip
Others	PCI-E 3.0 x8 node to node/NTB connectivity PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required


Expansion Slots (per Node)

PCI-Express	3x PCI-E 3.0 x8 slots (on riser)


Input / Output (per Node)

SAS	1x JBOD expansion port per node (mini-SAS HD)
LAN	2x RJ45 LAN ports
USB	2x USB rear ports (via KVM cable) 1x USB on-board (TypeA)
VGA	1x VGA Port (via KVM cable)
Serial Port / Header	1x console port (via KVM cable); Board to Board serial port connection available for management


System BIOS

BIOS Type	16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.3 ACPI up to 5.0 USB Keyboard support

Chassis

Form Factor	2U Rackmount
Model	CSE-927ETS


Dimensions

Height	3.5" (88mm)
Width	17.2" (437mm)
Depth	26.75" (679mm)
Gross Weight	85 lbs (38.6 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button Alarm Mute Switch
LEDs	Power LED Hard Drive Activity LED 2x Network Activity LED System Overheat LED Power Fail LED


Drive Bays

Hot-swap	24x Hot-swap 2.5" Drive Bays shared between server nodes SAS or enterprise SATA HDD only recommended SATA drives require LSI interposer


Backplane

SAS2 dual Expander Backplane, features: • Scalability through cascading • 6Gb SAS2/SATA2 HDD support • Inband SES-2 Enclosure Management • Redundancy dual ported SAS architecture • Robust AirMax server node connections (SBB specification)



System Cooling

Fans	10x PWM Fans


Power Supply with Power Distributor

920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C
AC Input	100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output	4 Amp @ +5V standby 75 Amp @ +12V
With Power Distributor	+5V: 45 Amp +3.3V: 24 Amp -12V: 0.6 Amp
Certification	Platinum Certified [ Test Report ]


PC Health Monitoring

CPU	Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Voltages. 5+1-switching voltage regulator
FAN	Total of 10 fan headers supporting up to 10 fans
Temperature	Monitoring for CPU and chassis environment Thermal Control for 10x fan connectors PECI


Operating Environment / Compliance
RoHS	RoHS Compliant