ATIC Computers - Servers / Supermicro A+ - AS-2122TG-HTRF - AS-2122TG-HTRF 2U-Twinx2 w/4-Nodes (2xG34 6x2.5" SATA 2xGLAN) 2x1620W

AS-2122TG-HTRF ( SC217HQ-R1620B H8DGT-HF) 2U-Twin x2 w/4-Nodes ( 2x G34/63xx AMD Opteron CPU, 8x DDR3-ECC-REG (max 256GB), 6x2.5" SAS/SATA, 2xGLAN ports, 1x IPMI2.0 KVM port ) - 2x 1620W redundant powers - 2U Rackmount - 2 Year Depot Carry-In Mfg. Warranty

Product SKUs

AS-2122TG-HTRF	A+ Server 2122TG-HTRF (Black)


Motherboard

Super H8DGT-HF


Processor/Chipset

CPU	Dual 1944-pin Socket G34 Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support
Chipset	AMD chipset SR5670 + SP5100
Note	Supports 6000 processors with Max ACP 80W (TDP 115W)


System Memory (per node)

Memory Capacity	Sixteen DIMM sockets Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs Quad channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage	1.35V or 1.5V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices (per node)

SATA	AMD SP5100 (RAID 0, 1, 10)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC
Network Controllers	Intel® 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support
VGA	Matrox G200 16MB DDR2
Super I/O	Winbond® W83527 chip


Expansion Slots (per node)

PCI-E	1x PCI-E 2.0 x16


Input / Output (per node)

SATA	6x SATA2.0 (3Gb/s) Ports
LAN	2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI
USB	5x USB 2.0 ports 2x Rear, 2x header, and 1x Type A
VGA	1x VGA port
Serial Ports	1x Fast UART 16550 serial port 1x serial port header


System BIOS (per node)

BIOS Type	16Mb SPI Flash ROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3

Chassis

Form Factor	2U Twin² Rackmount
Model	SC217HQ-R1400B


Dimensions (stand-alone chassis / package)

Height	3.47" (88mm) / 11.22" (285mm)
Width	17.25" (438mm) / 26.38" (670mm)
Depth	26.75 (679mm) / 39.76" (1010mm)
Gross Weight	85 lbs / 38.6 kg
Available Colors	Black


Front Panel

Buttons	4x Power On/Off button 4x UID button
LEDs	4x Power status LED 4x UID LED 4x Network activity LEDs 4x System overheat / fan failed / power failed LED


Drive Bays

HDD Bay	24x Hot-swap 2.5" SATA HDD (6 for each node) Enterprise SATA HDD only recommended


System Cooling

Fans	4x 80mm PWM cooling fans


Power Supply

1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input	1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output	1100W: +12V/92A; +5Vsb/4A 1400W: +12V/116A; +5Vsb/4A
With Distributor	+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp
Certification	80 PLUS Gold Certified [ Test Report ]


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator
FAN	Up to 4-fan status tachometer monitoring Up to four 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED +5V Standby Alert LED


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)